Home » Guide » Miscellaneous » Prusa enclosure webcam

All assembly guides:

Webcam

Assembly time: 10 min

Components:

  • Raspberry PI with power supply as described in option 1.
  • Webcam:
  • PIcam:
    • PIcam:  several models available on amazon or other.
      If you want a general overview, select a fisheye version.
    • PIcam FCC cable: 30cm to 50cm long.

Print parts in folder 17_Webcam_PIcam_accessories:

  • 17_Webcam_rail_accessories
  • 17_Webcam_rail_clamp
  • And the bracket depending on your webcam
Download

Assembly:

1. Webcam rail:

On the right front frame, assemble the webcam rail.

It uses the existing hinges screws. You need to unscrew the M3x6 screws and replace them with M3x12 screws.

2. Mounting the Logitech C270:

Rail slider is the same for all mounts.

You need:

  • 2x M3x12 screws
  • 2x M3 square nuts

Instructions on removing the Logitech C270 mount: https://www.youtube.com/watch?v=bWz1-wV8AU4

You will need to modify the focus of the Logitech c270. Printed parts are available here: https://www.thingiverse.com/thing:1406879

3. Mounting the Logitech C930/920:

https://www.thingiverse.com/thing:3013280

Files to print in “17_Webcam_PIcam_accessories” folder

  • 17_Webcam_rail_accessories_v2_v1.1
  • 17_Webcam_bracket_webcam_C920_Mount_v1
  • 3* 17_Webcam_arm_90d_L10_v1
  • 17_Webcam_rail_clamp_v1

 

4. Mounting the PI cam:

Use screw delivered with the PI cam to fix it on the support.

With fisheye version

Congratulations!