5. Final assembly

Temps de montage : 0h15

Required kit elements :

  • Prusabox assembled platform with printer inside
  • Prusabox assembled top
  • Prusabox assembled doors

    Step 1 Assembling the 2 parts of the printer-box

    Prusabox assembled platform with the printer inside

    Prusabox assembled top

    Take the top part of the printer-box and place it on the platform.

     

    Step 2 Fixing top to bottom

    Prusabox - img 302 - corners position
    Prusabox - img 303 - corners top position
    Prusabox - img 304 - corners screws
    Prusabox - img 305 - corners all
    Prusabox - img 302 - corners position Prusabox - img 303 - corners top position Prusabox - img 304 - corners screws Prusabox - img 305 - corners all

    Start on one corner:

    First, inser corner part on upright.

    Then slide down the upright.

    Fix the upright with 4 M4 screws

    Make the same on each corners

     

    Step 3 Installing the doors

    Prusabox - img 309 - left door
    Prusabox - img 306 - front door
    Prusabox - img 307 - right door
    Prusabox - img 308 - back door
    Prusabox - img 310 - top door
    Prusabox - img 309 - left door Prusabox - img 306 - front door Prusabox - img 307 - right door Prusabox - img 308 - back door Prusabox - img 310 - top door

    Install each door

    Left door

    Front door

    Right door

    Back door

    Top door

     Good to know:

    • If you ever need to open the printer-box (to work on the printer or add a mod), you don’t need do disassemble the whole printer-box:
    • Remove the doors.
    • Remove the M4 screws from each corner.
    • Lift up the upper part (roof + uprights).

    Step 4 Vertical cables cover

    Prusabox - img 311 - vertical cable management
    Prusabox - img 312 - vertical cable management
    Prusabox - img 311 - vertical cable management Prusabox - img 312 - vertical cable management
    If you choose to install LED and/or fan, you can at this step hide them with the vertical cable cover.
    There are two pieces. Make sure to place them the right way (see picture)

    You have successfully assembled the Prusabox