PrusaBox-2 assembly guide
We recommend to follow these steps in this order:
1
2
3
Printing
instructions
Platform
assembly
Side vent
4
5
6
Printer
adaptation
PSU and
switch
Control
panel
7
8
9
Top
Assembly
Front top
slot
LED
lights
10
11
12
Fan/Filter
Uprights
Assembly
Inside spool
holder
13
14
Doors and
final assembly
Top spool
holder
Recommendations
Instructions:
Please keep those instructions close by while assembling your printer-box: you may need to click on some of the pictures or watch our video tutorials.
Handling the printer:
Do not risk getting burned: wait until the printer has cooled down before handling it.
Always handle your 3D printer with care: the tray moves easily.
People required for assembly:
You can do this on your own.
Work area:
Set up on a stable table or work surface that can ideally be walked around.
If you can’t navigate around your table, that’s okay, you may have to orientate your printer-box differently but you won’t break your back.
Non supplied material:
To mount the printerbox, you can use the tools supplied with the Prusa printer:
- 1 2mm hex key
- 1 2.5mm hex key
- 1 clamp
For the air vent module, you can either use:
- 1 Swiffer wipe
- 1 surgical mask