Printing instructions

Printing materials:

We design every part according to PETG material. PETG is strong and easy to print. It is the same material as printer parts.
All files are easy to print with PETG prusament. We used default PrusaSlicer material profile for PETG.

Number of spool:

For a calssic set-up, you need around 1500 grammes of filament. Please take in consideration that in case of failed print, you will need more.

Printing parameters:

Layer thickness:

We recommend 0.2mm layer thickness.

Nozzle diameter:

All designs are made and tested with standard 0.4mm nozzle diameter. Printing with a larger nozzle will generate assembly issues.

Infill & perimeters:

For the 8 corners of the box: we recommend 60% infill with 2 perimeters OR 30% infill with 4 perimeters.
Other parts can be printed with 30% infill and 2 perimeters.

Supports:

Parts are designed to be printed without support.

Printing files:

Inside each folder there is a “STEP” subfolder, which contains all CAD files and modification log. It is necessary only if you want to modify our design.

All files for ModularBox have a prefix “MB”.